Suicom 800 Starter Kit

Suicom 800 - Communication Server for PCs

IT administrators will appreciate the optimised installation of Suicom 800. Just download, install and configure the software – you can start using Suicom 800 straight away with a functional range that covers virtually all the requirements of a call manager. Configuration takes place conveniently via an intuitive central administration interface, directly in the web browser, just like in standard PC networks: create a user, issue authorisations, set up access to the communication network.

Connection licenses for individual needs

Every company has different communication system requirements. To meet the scalability need, a licensing model is necessary for activation the external lines (SIP, S0, S2M) and phones that are actually used. If further IP lines or IP subscribers are needed, this is possible through ad ditional activation keys.

Available licenses for:

External lines

All these licenses are additional. The number of lines that are available increases with each activation of additional licenses.

  • Suicom 800 CAPI
    A S0 connection can be used from each CAPI-based ISDN card installed on the PC, and a license is required for this.
  • Suicom 800 BRI
    There is optimum integration in Suicom 800 when a PCI/PCIe card from Sangoma is used to connect to the ISDN. A license is required for each S0 interface (systems or multi-point interface).
  • Suicom 800 PRI
    Both the license and Sangoma PCI/PCIe card, must be installed on the PC when a primary rate access (S2M) is used.
  • OpenLine SIP 2
    The OpenLine SIP 2 license activates two IP phone connections (SIP-Trunks) via SIP.

Internal subscriber

All these licenses are additional. The number of phones being used at the same time increases each time a new license is activated.

  • OpenAccess 677xip
    To use Suicom 6770ip IP phones a corresponding number of licenses is required. Available for 1, 10, 20, and 50 phones.
  • OpenAccess 675xi
    This license is required for the Suicom SIP phones – Suicom 6700i. Available for 1, 10, 20, and 50 phones.
  • OpenAccess SIP 101
    License to use SIP phones from thirdparty manufacturers on Aastra 800 this particular license is required. It allows other SIP phones to be configured.
  • OpenSoftphone 100
    In order to use Suicom 2770ip, an appropriate number of OpenSoftPhone 100 and OpenAccess 677xip licenses must be activated. OpenSoftPhone 100 licenses are available in increments of 2, 4, 8 and 16 and can be combined up to a maximum of 200 licenses.
  • Suicom 800 FXS
    If Suicom 800 has to support an analogue terminal, a license is required for each connection, and a PCI/PCIe card from Sangoma must be installed.

Additional connection licenses

  • Suicom 800 G.729
    A high data compression is essential to use the available data line bandwidth for a large number of connections. Unlike codec G.711, G.729 only requires a quarter of the bandwidth. A license is required for each voice channel.
  • OpenLine Q.SIG-IP 1
    QSIG over IP allows communications systems at remote sites to be networked over IP routes. A license is required for each end (networking between several Suicom 800 systems or with OpenCom 100 and 1000).
  • OpenAccess Mobile Client
    License for integrating a mobile phone into Suicom 800. For more information about Fixed Mobile Convergence (FMC).

 

Start . About Suicom . Privacy . Legal Notice

© 2015 Suicom Technologies Limited. All Rights Reserved.